EXT Arma MX V3 (E-MX Damper) Shock for Sur-Ron, Talaria, E Ride Pro, Altis Sigma, Mantis X & More
EXT Arma MX V3 (E-MX Damper) Shock for Sur-Ron, Talaria, E Ride Pro, Altis Sigma, Mantis X & More
EXT Arma MX V3 (E-MX Damper) Shock
for Sur-Ron, Talaria, E Ride Pro, Altis Sigma, Mantis X & More
The Arma MX V3 is a direct bolt-on replacement shock for the Sur Ron Light Bee X, Talaria Sting, E Ride Pro, Altis Sigma, Mantis X, Arctic Leopard XE Pro, XE Pro S, and more. Please contact us with fitment questions. No additional Hardware is needed, simply bolt-on and go. Shock will be pre tuned by EXT-USA on the information you provide.
Engineered with performance and control as primary objectives, the shock structure has seen a redesign in order to be more robust. The Hydraulic Bottom-Out Circuit (HBC) has been enhanced with a wider range of adjustment, in order to prevent bottom-out issues, while allowing riders to use softer spring rates and providing excellent support and end stoke characteristics.
Please allow for 7-10 business days on this product thanks!
The Arma MX includes the following features
- 4 way adjustable: LSC-HSC-LSR-HBC (Hydraulic Bottom-Out Control)
- High flow 29 mm main piston
- 24 mm valve piston
- 14 mm shaft (50% larger than most other coils on market to help deal with large side loading events)
- Engineered rebound circuit to separate bump and rebound oil flow – Ultra low-friction coating
- User adjustable HBC technology
- Very low reservoir pressure for maximum sensitivity and low cavitation(55 PSI)
- Full custom hydraulic setup that is bike and rider specific for each shock
- Very low hysteresis for high dynamic response
- High turbulent flow for progressive dampening and mid stroke support
- Low friction seal
- Thinner bottom-out bumper and debris clearing washer
- New low profile rebound knob for easy spring swap
- Included with 1 light weight spring available in 400lb, 450lb, 500lb, 550lb or 600lbs (Lower options may be available upon request)
- Comes with specific mounting hardware for easy bolt in instillation.
*This is a special edition shock that will be built in limited runs.
| Spring Guide | |
|---|---|
| Rider Weight | Spring |
| Up to 140 | 400 |
| 140 to 180 | 450 |
| 180-210 | 500 |
| 210-240 | 550 |
| 240+ | 600 |
|
Note: This table is a general EXT Arma MX V3 Compatibility
|
|
Original: $1,150.00
-70%$1,150.00
$345.00More Images
EXT Arma MX V3 (E-MX Damper) Shock for Sur-Ron, Talaria, E Ride Pro, Altis Sigma, Mantis X & More
EXT Arma MX V3 (E-MX Damper) Shock
for Sur-Ron, Talaria, E Ride Pro, Altis Sigma, Mantis X & More
The Arma MX V3 is a direct bolt-on replacement shock for the Sur Ron Light Bee X, Talaria Sting, E Ride Pro, Altis Sigma, Mantis X, Arctic Leopard XE Pro, XE Pro S, and more. Please contact us with fitment questions. No additional Hardware is needed, simply bolt-on and go. Shock will be pre tuned by EXT-USA on the information you provide.
Engineered with performance and control as primary objectives, the shock structure has seen a redesign in order to be more robust. The Hydraulic Bottom-Out Circuit (HBC) has been enhanced with a wider range of adjustment, in order to prevent bottom-out issues, while allowing riders to use softer spring rates and providing excellent support and end stoke characteristics.
Please allow for 7-10 business days on this product thanks!
The Arma MX includes the following features
- 4 way adjustable: LSC-HSC-LSR-HBC (Hydraulic Bottom-Out Control)
- High flow 29 mm main piston
- 24 mm valve piston
- 14 mm shaft (50% larger than most other coils on market to help deal with large side loading events)
- Engineered rebound circuit to separate bump and rebound oil flow – Ultra low-friction coating
- User adjustable HBC technology
- Very low reservoir pressure for maximum sensitivity and low cavitation(55 PSI)
- Full custom hydraulic setup that is bike and rider specific for each shock
- Very low hysteresis for high dynamic response
- High turbulent flow for progressive dampening and mid stroke support
- Low friction seal
- Thinner bottom-out bumper and debris clearing washer
- New low profile rebound knob for easy spring swap
- Included with 1 light weight spring available in 400lb, 450lb, 500lb, 550lb or 600lbs (Lower options may be available upon request)
- Comes with specific mounting hardware for easy bolt in instillation.
*This is a special edition shock that will be built in limited runs.
| Spring Guide | |
|---|---|
| Rider Weight | Spring |
| Up to 140 | 400 |
| 140 to 180 | 450 |
| 180-210 | 500 |
| 210-240 | 550 |
| 240+ | 600 |
|
Note: This table is a general EXT Arma MX V3 Compatibility
|
|
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
EXT Arma MX V3 (E-MX Damper) Shock
for Sur-Ron, Talaria, E Ride Pro, Altis Sigma, Mantis X & More
The Arma MX V3 is a direct bolt-on replacement shock for the Sur Ron Light Bee X, Talaria Sting, E Ride Pro, Altis Sigma, Mantis X, Arctic Leopard XE Pro, XE Pro S, and more. Please contact us with fitment questions. No additional Hardware is needed, simply bolt-on and go. Shock will be pre tuned by EXT-USA on the information you provide.
Engineered with performance and control as primary objectives, the shock structure has seen a redesign in order to be more robust. The Hydraulic Bottom-Out Circuit (HBC) has been enhanced with a wider range of adjustment, in order to prevent bottom-out issues, while allowing riders to use softer spring rates and providing excellent support and end stoke characteristics.
Please allow for 7-10 business days on this product thanks!
The Arma MX includes the following features
- 4 way adjustable: LSC-HSC-LSR-HBC (Hydraulic Bottom-Out Control)
- High flow 29 mm main piston
- 24 mm valve piston
- 14 mm shaft (50% larger than most other coils on market to help deal with large side loading events)
- Engineered rebound circuit to separate bump and rebound oil flow – Ultra low-friction coating
- User adjustable HBC technology
- Very low reservoir pressure for maximum sensitivity and low cavitation(55 PSI)
- Full custom hydraulic setup that is bike and rider specific for each shock
- Very low hysteresis for high dynamic response
- High turbulent flow for progressive dampening and mid stroke support
- Low friction seal
- Thinner bottom-out bumper and debris clearing washer
- New low profile rebound knob for easy spring swap
- Included with 1 light weight spring available in 400lb, 450lb, 500lb, 550lb or 600lbs (Lower options may be available upon request)
- Comes with specific mounting hardware for easy bolt in instillation.
*This is a special edition shock that will be built in limited runs.
| Spring Guide | |
|---|---|
| Rider Weight | Spring |
| Up to 140 | 400 |
| 140 to 180 | 450 |
| 180-210 | 500 |
| 210-240 | 550 |
| 240+ | 600 |
|
Note: This table is a general EXT Arma MX V3 Compatibility
|
|
